YHTAUTO 5×5.5 Wheel Spacers 1 Inch Compatible with Ford, Dodge, Jeep Models, F-150, E-150, Ram 1500, Bronco, CJ3 CJ5 CJ6 CJ7 CJ5A, 5 Lug Tire Spacers w/ 1/2″-20 Studs, 108 mm Center Bore, 4PCS Black

Price: $97.95
(as of Sep 05, 2025 14:52:09 UTC – Details)

From the brand

Installation with Confidence: 1 inch wheel spacers | Bolt Pattern: 5×5.5 inch | Center Bore: 108 mm (without lip) | Threaded Studs/Nuts: 1/2″-20 | Recommended torque: 85-90 FT/LBS (Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and clean the rust on surfaces)
Custom Fit 5 Lug Wheel Spacers: The spacers for car—Compatible with Ford, Dodge and Jeep Models: 1981-1994 B1500|1994-2001 Ram 1500|1994-2003 Ram 1500 Van|1966-1996 Bronco|1992-2001 E-150 Econoline| 1953-1983 F-100|1948-1974/1992-1996 F-150|1955-1975/1979-1983 CJ-5|1959-1975 CJ-6|1976-1986 CJ-7 |and more; For full models refer to the amazon garage tool or our picture
Little Change Huge Difference: Adapters and spacers give your vehicle a wider stance for a more aggressive look and improved off-roading capabilities. They enhance grip, acceleration, and handling, while also allowing for larger brake calipers or lift/lowering kits
Safety Tips for Installers: The fear with any spacer is that it will come loose. To prevent this, be sure to not only follow the recommended torque specifications, check regularly for looseness and tighten to the recommended torque, but use high-strength thread locker we are equipped with on the stock studs that the spacer bolts to. It is recommended to drive 50-100 miles to re-tighten after initial installation, then operate again every 2000-3000 miles
What You Will Get: 4pcs 5×5.5 wheel spacers and 1pc installation instructions; Once installed, gives the truck the clearance and tougher look you want, and handles much better